924S / 944 NA 8v 3" LINDSEY STEEL EXHAUST
Lindsey Racing puts together yet another affordable production
exhaust system. This time for the 944 NA.
This exhaust is made from aluminized coated steel exhaust tubing and a full 3" in diameter. Formed with mandrel bends making it free flowing throughout without pinch points and
collapsed tubing like the factory system.
All systems come complete with band clamps for installation.
On both our systems described below, the muffler, muffler
replacement pipe and optional cat are sold separately.
LR-944-EXH-31
This version connects to the
factory header arrangement. You simply cut off
the factory exhaust past the O2 sensor and test port, slip on our
system, clamp it down and you're connected.
LR-944-EXH-32
This version connects to the
MSDS headers. It attaches directly to the header
collector.
Thermal Coating:
If you wish to have the exhaust
thermal barrier coated, select either the EXH-31 or EXH-32 with
thermal coating. That adds $150 to the price of a system.
Highly recommended for a track car. It will help keep the heat from entering the driver compartment. It will also add to the
life expectancy of the exhaust. With or without the thermal coating, the exhaust will give you many years of use. Mufflers and MRPs:
The systems do not come with a muffler. Some of you may already
have a muffler you want to use so we don't force you to purchase
one. The dimensions of the mufflers we use are 19" overall length,
3" center in, and 3" center out.
- Magnaflow polished stainless steel - Blow through design.
- Borla XR-1 Sportsman Racing Muffler Stainless Steel.
- Pre Muffler.
- Muffler Replacement Pipe - 19" hollow pipe replaces muffler. Loud! "Race Only"
Optional Cat:
All exhausts have a cat replacement pipe in them. It's the second pipe in the system. You can remove that
pipe and add our performance CAT at any time or
select it with your exhaust purchase.
Tips:
MSDS Headers:
Optional MDSD Headers are available with Plain Finish or Ceramic Thermal Coated Finish.
Pre-Muffler Muffler:
The 3" system sounds awesome with any of our muffler
choices. For some however, it may be a little to
loud. For them, we offer a pre-muffler muffler. This is a blow through muffler with little or
no restriction that goes in place of the second pipe
in our system. This Pre-Muffler quiets down the system
considerably and looks like a cat visually.
|
