RACE ALTERNATOR WIRING
Wiring Attachments
This is how you wire the light weight 50 amp Bosch Racing Alternator
we supply.
Main Power Out
Connect the large Power Output wire to this alternator as it was on the stock
alternator. It's the threaded stud type post.
Jumper Wire
You need to make and install a jumper wire between the threaded stud power out post and the blade terminal.
Blue Wire from chassis or charge light.
Your original alternator has a small blue wire coming out the end of the harness that attached
to a threaded post on your original alternator. You need to attach that blue wire to the
blade terminal on the alternator where the jumper wire also attaches.
|
|
