FUEL INJECTORS SIEMENS & BOSCH
As you modify your engine, you raise the need for additional fuel. You can only go so far by
raising pressure, mapping chip sets and adjusting fuel
controllers. Sooner or later you will need larger
injectors to get the job done. We have several
injectors for the 944 Turbo and other applications.
Flow Matched Power Pac Kits:
- Siemens 55 (lb/hr) / 570 (cc/min) Power Pac
- Siemens 72 (lb/hr) / 750 (cc/min) Power Pac
- Siemens 83 (lb/hr) / 750 (cc/min) Power Pac
Lindsey Racing Power Pac Injector Kits for the 944 Turbo
include 4 precision injectors. These injectors are flow
matched sets. They are flowed at 3.0 bar of pressure with a 6ms test pulse which simulates actual operating conditions. Each set comes with an injector data sheet showing the performance of the set. Injectors not flowed
and matched as sets can have a wide percentage of flow difference. Our Power Pac Kits eliminate that possibility. If the company you're considering
buying injectors from cannot produce a flow sheet with
flow data matching the serial numbers on the injectors, then their flow claims are probably false. Want guarantees? You should! ALL of our Power Pac Injector
Kits come with flow data sheets.
Lindsey Racing offers only the best and safest fuel
injectors on the market for your 944 Turbo, Period!
There is nothing more important to your engine than
accurate and reliable fuel delivery. Don't settle for anything but the best or you may regret it later. What
does it cost to replace a melted piston? When you
think of it that way, spending a little bit more for the right pieces up front makes sense. The wrong choice can cost you performance, time and money.
Think about this... Everything you have done to control your fuel comes down to the fuel injector as the final and last item in a long chain of events that is actually
going to deliver it. Make sure they get the proper job
done.
Standard Injector Kits:
- Siemens55 (lb/hr) / 570 (cc/min) Power Pac
- Siemens72 (lb/hr) / 750 (cc/min) Power Pac
These are sets of four injectors. They are not flow tested and matched, thus giving you a cost savings.
|
