INTERCOOLER "HARD" PIPES


Cart Qty: None   Ship Weight: 6.00

NEW

NTERCOOLER "HARD" PIPES for 944T

Lindsey Racing's Aluminum Intercooler Pipes for your 944 Turbo. Also called Hard Pipes, these feature minimal bends for maxium flow, straight 2-1/2" (63.5mm) aluminum pipes with bead rolled ends, exclusive custom designed and manufactured silicone connectors and hose clamps.



We are offereing the Intercooler to Throttle portion of the kit two different ways. The difference is in the silicone connector for the pipe to throttle body. One versions is set up for a stock type and location bypass valve. The Hose at the throttle body has a built in 1" ID hose to connect to the bypass valves outlet. The other version of the hose connection does not have a 1" hose for a bypass valve. You can attach your vent to atmosphere bypass valve to the aluminum pipe between the two hoses. There is 6" of exposed pipe between the hoses for you to mount your bypass valve.

Benefits:

  • The main benefit is the elimination of blowing the connectors off and loosing boost pressure. Stock pipes and connectors have a tendency to come loose and blow off. Usually at the wrong time or place. Imagine losing a connector during a race. You're done! You can watch the fun from the infield. The main reason this can happen is because of the small overlap of the hoses onto the fittings.
  • Another benefit is their good looks. Many of our customers take pride in the under hood appearance of the engine compartment. These cleanly manufactured pipes and hoses in both highly polished or satin black powder coated hard pipes fit the bill.

Available Configurations:

  • Using stock type bypass valve (hose at throttle body has 1" inlet hose for bypass valve)
  • Using vent to atmosphere type bypass valve (hose at throttle body has no 1" hose)

Available Pipe Finish:

  • Fully Polished (standard)
  • Satin Black Powder Coated

Available 5 Ply/6mm Silicone Connector Colors:

  • Black Silicone
  • Blue Silicone
  • Red Silicone

These pipes will not work with the factory air box in place. Typical use would be for a car using a MAF kit such the M-Tune and other kits removing the air box, or when running a stand alone type engine managament.

NTERCOOLER "HARD" PIPES for 944T

Lindsey Racing's Aluminum Intercooler Pipes for your 944 Turbo. Also called Hard Pipes, these feature minimal bends for maxium flow, straight 2-1/2" (63.5mm) aluminum pipes with bead rolled ends, exclusive custom designed and manufactured silicone connectors and hose clamps.



We are offereing the Intercooler to Throttle portion of the kit two different ways. The difference is in the silicone connector for the pipe to throttle body. One versions is set up for a stock type and location bypass valve. The Hose at the throttle body has a built in 1" ID hose to connect to the bypass valves outlet. The other version of the hose connection does not have a 1" hose for a bypass valve. You can attach your vent to atmosphere bypass valve to the aluminum pipe between the two hoses. There is 6" of exposed pipe between the hoses for you to mount your bypass valve.

Benefits:

  • The main benefit is the elimination of blowing the connectors off and loosing boost pressure. Stock pipes and connectors have a tendency to come loose and blow off. Usually at the wrong time or place. Imagine losing a connector during a race. You're done! You can watch the fun from the infield. The main reason this can happen is because of the small overlap of the hoses onto the fittings.
  • Another benefit is their good looks. Many of our customers take pride in the under hood appearance of the engine compartment. These cleanly manufactured pipes and hoses in both highly polished or satin black powder coated hard pipes fit the bill.

Available Configurations:

  • Using stock type bypass valve (hose at throttle body has 1" inlet hose for bypass valve)
  • Using vent to atmosphere type bypass valve (hose at throttle body has no 1" hose)

Available Pipe Finish:

  • Fully Polished (standard)
  • Satin Black Powder Coated

Available 5 Ply/6mm Silicone Connector Colors:

  • Black Silicone
  • Blue Silicone
  • Red Silicone

These pipes will not work with the factory air box in place. Typical use would be for a car using a MAF kit such the M-Tune and other kits removing the air box, or when running a stand alone type engine managament.

NEW

NTERCOOLER "HARD" PIPES for 944T

Lindsey Racing's Aluminum Intercooler Pipes for your 944 Turbo. Also called Hard Pipes, these feature minimal bends for maxium flow, straight 2-1/2" (63.5mm) aluminum pipes with bead rolled ends, exclusive custom designed and manufactured silicone connectors and hose clamps.



We are offereing the Intercooler to Throttle portion of the kit two different ways. The difference is in the silicone connector for the pipe to throttle body. One versions is set up for a stock type and location bypass valve. The Hose at the throttle body has a built in 1" ID hose to connect to the bypass valves outlet. The other version of the hose connection does not have a 1" hose for a bypass valve. You can attach your vent to atmosphere bypass valve to the aluminum pipe between the two hoses. There is 6" of exposed pipe between the hoses for you to mount your bypass valve.

Benefits:

  • The main benefit is the elimination of blowing the connectors off and loosing boost pressure. Stock pipes and connectors have a tendency to come loose and blow off. Usually at the wrong time or place. Imagine losing a connector during a race. You're done! You can watch the fun from the infield. The main reason this can happen is because of the small overlap of the hoses onto the fittings.
  • Another benefit is their good looks. Many of our customers take pride in the under hood appearance of the engine compartment. These cleanly manufactured pipes and hoses in both highly polished or satin black powder coated hard pipes fit the bill.

Available Configurations:

  • Using stock type bypass valve (hose at throttle body has 1" inlet hose for bypass valve)
  • Using vent to atmosphere type bypass valve (hose at throttle body has no 1" hose)

Available Pipe Finish:

  • Fully Polished (standard)
  • Satin Black Powder Coated

Available 5 Ply/6mm Silicone Connector Colors:

  • Black Silicone
  • Blue Silicone
  • Red Silicone

These pipes will not work with the factory air box in place. Typical use would be for a car using a MAF kit such the M-Tune and other kits removing the air box, or when running a stand alone type engine managament.

Product Image
Product Name
Pricing
Qty
NEW
LINDSEY RACING INTERCOOLER "HARD" PIPE KITS
Part# LRA-IPK

Cart Qty: None

Ship Weight: 6.00


PIPE FINISH:
SILICONE HOSE COLOR:
CONFIGURATION:
$274.95

Cart Summary
Items: 0
Subtotal: