3 PIECE CROSS MEMBER


Cart Qty: None   Ship Weight: 15.00

3 PIECE CROSS MEMBER 944 ALL / 968



The Lindsey Racing 3 Piece Cross Member Modification... Making your life, or that of your mechanic much easier when it's time to open the bottom of your engine up for any reason. Rod bearings, oil pan pick-up replacement, oil pan gasket for example.

Accessing the oil pan can be a huge job taking hours and hours. With the Lindsey Racing 3 Piece Cross Member, you can simply remove the center of the cross member for total oil pan access. On a 944 Turbo when you combine this with our Lindsey Racing 2 Piece Cross Over Pipe Modification, you make a huge job much smaller.

Eliminates having to suspend the engine, remove the motor mounts and un-do the lower control arms. Just remove or drop the steering rack and remove the center section of the cross member.

When combining the two systems if you have a 944 Turbo, you can change the pan without ever having to open the hood. Imagine that! A 12 hour job can be performed in 2 or 3 at the track.

Do you pay someone to service your bearings or pull your oil pan for any reason? This system will pay for itself in labor savings the first time you have to use it and keep on saving down the road on future oil pan pulls... It may even help you make a race that otherwise you couldn't like it did for us.



Features:


  • Easy Oil Pan Access
  • Full 1/4" Plate End Caps
  • TIG Welded
  • Sand Blasted & Painted in 500F Degree Engine Enamel.
  • Zinc Plated Hardware

We use this system on our Race Car. It allowed us to change a blown out oil pan gasket in 3 hours at the Topeka Club Race in October 2001. Otherwise, we would have been packing up the trailer and heading home having lost our the race for sure, entrance fees and other expenses down the drain. We made the next race!

NOTE: Please clean your cross member free of grease and oil and attached parts such as motor mounts or brackets before you send it to us. Cross Members not cleaned within reason will be charged a cleaning fee based on time and materials required to get it to a condition where we can work with it.

3 PIECE CROSS MEMBER 944 ALL / 968



The Lindsey Racing 3 Piece Cross Member Modification... Making your life, or that of your mechanic much easier when it's time to open the bottom of your engine up for any reason. Rod bearings, oil pan pick-up replacement, oil pan gasket for example.

Accessing the oil pan can be a huge job taking hours and hours. With the Lindsey Racing 3 Piece Cross Member, you can simply remove the center of the cross member for total oil pan access. On a 944 Turbo when you combine this with our Lindsey Racing 2 Piece Cross Over Pipe Modification, you make a huge job much smaller.

Eliminates having to suspend the engine, remove the motor mounts and un-do the lower control arms. Just remove or drop the steering rack and remove the center section of the cross member.

When combining the two systems if you have a 944 Turbo, you can change the pan without ever having to open the hood. Imagine that! A 12 hour job can be performed in 2 or 3 at the track.

Do you pay someone to service your bearings or pull your oil pan for any reason? This system will pay for itself in labor savings the first time you have to use it and keep on saving down the road on future oil pan pulls... It may even help you make a race that otherwise you couldn't like it did for us.



Features:


  • Easy Oil Pan Access
  • Full 1/4" Plate End Caps
  • TIG Welded
  • Sand Blasted & Painted in 500F Degree Engine Enamel.
  • Zinc Plated Hardware

We use this system on our Race Car. It allowed us to change a blown out oil pan gasket in 3 hours at the Topeka Club Race in October 2001. Otherwise, we would have been packing up the trailer and heading home having lost our the race for sure, entrance fees and other expenses down the drain. We made the next race!

NOTE: Please clean your cross member free of grease and oil and attached parts such as motor mounts or brackets before you send it to us. Cross Members not cleaned within reason will be charged a cleaning fee based on time and materials required to get it to a condition where we can work with it.

3 PIECE CROSS MEMBER 944 ALL / 968



The Lindsey Racing 3 Piece Cross Member Modification... Making your life, or that of your mechanic much easier when it's time to open the bottom of your engine up for any reason. Rod bearings, oil pan pick-up replacement, oil pan gasket for example.

Accessing the oil pan can be a huge job taking hours and hours. With the Lindsey Racing 3 Piece Cross Member, you can simply remove the center of the cross member for total oil pan access. On a 944 Turbo when you combine this with our Lindsey Racing 2 Piece Cross Over Pipe Modification, you make a huge job much smaller.

Eliminates having to suspend the engine, remove the motor mounts and un-do the lower control arms. Just remove or drop the steering rack and remove the center section of the cross member.

When combining the two systems if you have a 944 Turbo, you can change the pan without ever having to open the hood. Imagine that! A 12 hour job can be performed in 2 or 3 at the track.

Do you pay someone to service your bearings or pull your oil pan for any reason? This system will pay for itself in labor savings the first time you have to use it and keep on saving down the road on future oil pan pulls... It may even help you make a race that otherwise you couldn't like it did for us.



Features:


  • Easy Oil Pan Access
  • Full 1/4" Plate End Caps
  • TIG Welded
  • Sand Blasted & Painted in 500F Degree Engine Enamel.
  • Zinc Plated Hardware

We use this system on our Race Car. It allowed us to change a blown out oil pan gasket in 3 hours at the Topeka Club Race in October 2001. Otherwise, we would have been packing up the trailer and heading home having lost our the race for sure, entrance fees and other expenses down the drain. We made the next race!

NOTE: Please clean your cross member free of grease and oil and attached parts such as motor mounts or brackets before you send it to us. Cross Members not cleaned within reason will be charged a cleaning fee based on time and materials required to get it to a condition where we can work with it.
Product Image
Product Name
Pricing
Qty
3 PIECE CROSS MEMBER 924S / 944 ALL / 968
Part# LRA-951-XMEM

Cart Qty: None

Ship Weight: 15.00


CORE CHARGE:
$314.95

Cart Summary
Items: 0
Subtotal: