HIGH PERFORMANCE IGNITION WIRES "SS BRAIDED" 924S / 944 ALL / 968
High Performance Ignition Wires for Porsche cars. These wires are the finest ignition wires available. They utilize BERU connectors which provide a reliable connection and transfer the electrical power under extreme operating conditions. Beru connectors are designed to OEM specifications. BERU connectors withstand up to 40,000 volts, temperatures up to 500ยบ F, vibrations, salt water, road dust and cleaning agents.
But we didn't stop there! We took our High Performance Ignition Wire sets and covered them in Braided Stainless Steel like some '73-'89 911s use. Then we added an individual grounding strap to each wire lead including the coil wire. Sure, they may help cut down on radio interference and prevent you from ever
getting shocked again, but we mostly did it for the "BLING" factor. There is no better performing,
longer lasting or better looking set of wires for your 4 Cylinder Porsche.
For Models:
- 924S
- 944
- 944S
- 944S2
- 944T
- 968
Each wire has it's own ground strap. The eyelet of the strap attaches to the intake
manifold bolt. You can remove the plug wire from the spark plug without removing the
strap for changing or servicing spark plugs. The coil wire has it's own ground strap that
can either attach to the front clam housing for the distributor cap or the windshield washer reservoir bottle mounting bracket.
Features Include:
- OEM Spec BERU Connectors
- 8mm Silicone Wire
- Braided Stainless Steel Covering
- Ground Straps on each wire
|
