HARD "INTERCOOLER" PIPES for 944T

Lindsey Racing's light weight Aluminum Hard Pipes for your 944 Turbo. Featuring mandril bends, minimal number of pieces, bead rolled ends, silicone connectors and clamps.



These pipes are made from the minimal number of pieces. Many pipes we have seen have several cuts and welds. Welds that are difficult if not impossible to clean up on the inside. These are clean inside and out for un-restricted air flow and clean looks.

We use only mandril bent tubing to make for nicely flowing turns in the piping. This translates into minimal restriction and maximum air flow.

Benefits:

• The main benefit is the elimination of blowing the connectors off. Stock pipes and connectors have a tendency to come loose and blow off. Usually at the wrong time or place. Imagine losing a connector during a race. You're done! You can watch the fun from the infield. Been there, done that!
  
• Second is the additional radiant cooling from the aluminum pipe material making for a cooler intake temperature then steel or SS pipes.
  
• Third benefit is their good looks. Many of our customers take pride in the under hood appearance of the engine compartment. These cleanly manufactured and optionally highly polished or satin black powder coated hard pipes fit the bill.

Individual Pipes or Complete Sets:

• Turbo to Intercooler Pipe.
  
• Intercooler to Throttle Body Pipe.
  
• Complete Kit with both Turbo to Intercooler & Intercooler to Throttle Body Pipes.

Available Pipe Finish:

• Plain (Natural Fabricated Look)
• Satin Black Powder Coated
• Fully Polished

Pipe Material:

Available 4 Ply Silicone Connector Colors:

• Blue Silicone
• Red Silicone
• Black Silicone

These pipes will not work with the factory air box in place. Typical use would be for a car using a MAF kit.