Autopower Industries manufactures a variety of roll bars and cages for street vehicles and all out race cars.
Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the
installation. Most application are a true bolt-in and require NO WELDING. A great amount of time has gone into developing and perfecting each product to offer the utmost in strength and proper fit.
RACE ROLL BAR
* Designed for solo autocross and time trials.
* Meets PCA and SCCA and most race organization rules.
* Tube size and type can be selected for individual needs.
* 4 point mounting with welded diagonal cross brace.
* All necessary installation hardware included.
STREET ROLL BAR
* Manufactured from 1.750" x .120" ERW tubing.
* Most are designed with 4 point mounting.
* Rear seat and/or convertible top remain in place.
* 4 point bolt-in mounting design.
* All necessary installation hardware included.
RACE ROLL BAR WITH OPTIONS
* Horizontal tube for shoulder harness mounting.
* Bolt in removable diagonal and/or horizontal brace.
STREET-SPORT ROLL BAR
* Designed for high performance street use.
* Tube size 1.750" x .120 DOM mild steel
* Bolt-in removable horizontal harness mount tube.
* 4 point bolt-in mounting design.
* All hardware included for installation.
BOLT IN ROLL CAGE
* SCCA, NASA and PCA legal for club racing.
* Top of the line in fit and construction.
* These cages are made to order, allowing for tube size and type to be selected.
* Diagonal cross brace and horizontal brace are a permanent weld-in design.
U-WELD FRONT CAGE KIT
* Intended to be added to Autopower race roll bar.
* Final fitting and welding are required to install.
* Choose tube size when ordering.
* 2 forward support brace tubes.
* Top windshield cross tube.
* 4 top corner gussets.
* Mounting plates and hardware included with kit.
ADJUSTABLE SEAT BRACE
* This easy-to-adjust seat support brace meets SCCA
requirements. It bolts to the horizontal tube in the roll cage with no welding required.
* Available to fit 1-1/2" or 1-3/4" tubing.
PAINT FINISH - Most steel products are sprayed with an industrial grade gloss black coat for a rust protection.
EXPECT some paint damage during shipping. You may want to refinish products before final installation. It is best to check fit and drill all holes before you repaint. There is NO paint finish guarantee.
